EAW EAW ANYA V2 Black - 3-way full-range ADAPTive array module
- 24/7 support
- in house training
- in house service centre
- 055 538 66 88
Specifications
Information
The EAW Anya V2 is a breakthrough, 3-way full-range ADAPTive array module engineered for large-scale concert touring, stadiums, arenas, and acoustically demanding festival grounds. Unlike conventional line arrays, Anya arrays suspend in perfectly straight vertical columns (0° mechanical splay). Vertical coverage (from 0° to 90°), directivity shaping, and tonal balance are steered entirely in the digital domain using EAW Resolution™ 2 software.
Acoustically, the module integrates an extraordinary density of transducers: fourteen 1" exit compression drivers loaded on a proprietary CSA waveguide spanning nearly the full front baffle, six 5" cone mid-frequency drivers in two columns of three with Radial Phase Plugs™, and dual 15" low-frequency woofers utilizing Off-Center Aperture™ loading. This configuration widens the acoustic centers, maintaining precise 70° nominal horizontal pattern control deep into the low frequencies (scalable to 360° with multi-column arrays).
Each Anya V2 houses a field-replaceable Power Plant featuring 22 discrete Class-D amplifier channels and individualized DSP for every single transducer. Governed by EAW Focusing™ and DynO™ dynamic optimization, it generates 148 dB peak SPL (@ 1 m, up to 152 dB SPL array peak) with pristine phase linearity. Signal networking is managed over redundant Dante™ with automatic analog failover.
Specifications:
| Crossover type | Active DSP-controlled (individual FIR/IIR filtering per transducer with EAW Focusing & DynO) |
| Power handling (IEC) MHF: | Self-powered / Active (20 onboard Class-D amplifier channels: 6x MF + 14x HF) |
| Frequency response (-3 dB) | 40 Hz – 18 kHz |
| Frequency response (-10 dB) | 35 Hz – 18 kHz |
| Nominal dispersion | Horizontal: 70° (scalable to 360°) | Vertical: Adaptive 0° to 90° via Resolution 2 |
| Power handling (IEC) LF: | Self-powered / Active (2 onboard Class-D amplifier channels for 2x 15" LF) |
| Sensitivity LF | N/A (Fully integrated active system) |
| Maximum SPL | 148 dB peak (@ 1 m, free space) / up to 152 dB SPL array peak |
| Impedance FR | N/A (Integrated 22-channel Class-D amplification) |
| Flying hardware | Integrated EAW ADAPTive rigging system (straight vertical columns, 0° splay, captive hardware) |
| Components | LF: 2x 15" (4" VC, Off-Center Aperture™) | MF: 6x 5" (Radial Phase Plug™) | HF: 14x 1" exit compression drivers |
| Behuizing: connector | Neutrik etherCON (2x Dante/Control), XLR 3-pin analog in/loop, powerCON TRUE1 in/thru |
| Behuizing: bekabeling | Neutrik powerCON TRUE1 mains power + Cat5e/Cat6 etherCON data/Dante |
| Afmetingen: H x B x D | 472 mm x 1143 mm x 787 mm (18.6" x 45.0" x 31.0") |
| Gewicht | 129.3 kg (285 lbs) |
| Behuizing Afwerking | Baltic birch plywood with black RoadCoat polyurethane finish |
| Afwerking | Black (RoadCoat) |
| Behuizing: grille | Powder-coated perforated steel with open-cell acoustic foam |